Brief introduction
| model | HongJin-8942 |
| Specification | 300ml/branch |
| characteristic | HongJin-8942 is a one-component room temperature dealcohol curing RTV silicone. Before curing, it is paste-like and does not sag. After curing, it becomes a tough elastic silicone rubber. It has excellent adhesion to most substrates and good sealing. and has excellent weather resistance. Primerless bonding can be achieved for general materials, including enamelled steel, aluminum, ceramics, glass and some engineering plastics, and can be used as a form-in-place gasket (FIPG). |
| technical parameter | It is widely used in the bonding and sealing of LED lamps, automotive lamps, electronic appliances and other products, and can be used as a form-in-place gasket (FIPG). |
Technical parameter
| Attributes | Reference |
| Exterior | white paste |
| density（g/cm3） | 1.15±0.20 |
| hardness（Shaw BrothersA） | 30～45 |
| Dry time（min） | ≤40 |
| Shear strength（MPa）,7sky25℃/50%RH，AL/AL | ≥0.8 |
| Elongation（100%），7sky25℃/50%RH | 600 |
Precautions
1、Clean and dry the surface to be adhered to.
2、Squeeze the glue onto the cleaned and clean surface to make it evenly distributed, and then close and fix the surface to be adhered.
3、The thickness of the potting should not exceed 5mm as far as possible. The deeper the adhesive layer is, the longer the curing time is.
4、The speed of curing is related to temperature and humidity. High temperature and high humidity can promote moisture curing. It takes 7 days to fully cure.
5、It is recommended to store in a dry and cool place below 30°C.
Landline ：0755-28307837
Mail ：sales@szhjtec.com
contact ：吳先生 18688927121
王先生 13332958891
address ：深圳市龍崗區(qū)坪地街道教育北路49號5B棟501
Scan and pay attention to the public number
Copyright ? 2020 深圳市宏進科技有限公司All Rights Reserved 粵ICP備20066503
Scan and pay attention to the public number